Bottled Water
High-cavity blowing for still and purified water, from light 0.5L bottles to 5-gallon containers on the same platform family.
- Bottle range
- 0.5L – 5 gal
- Typical output
- 2,000 – 20,000 bph
Solutions
One line, matched to your bottle and output
Moulds, blow moulding machine and auxiliary equipment specified together, so the line reaches production conditions as a single scope.
By Industry
Solutions across the bottle categories you supply
Each solution lists the bottle range it covers and a typical output band, so you can find the closest match before we tailor it.
Carbonated Soft Drinks
Stable wall thickness and base geometry for pressurised bottles, matched to a high-pressure air system built for continuous shifts.
- Bottle range
- 0.3L – 2L
- Typical output
- 8,000 – 24,000 bph
Edible Oil
Clear, handle-ready jugs and bottles with moulds designed for the thicker walls edible oil containers need.
- Bottle range
- 0.5L – 5L
- Typical output
- 1,500 – 10,000 bph
Condiments & Sauces
Bottle and mould design for sauce and condiment formats, including wide-mouth and custom neck finishes.
- Bottle range
- 0.2L – 2L
- Typical output
- 1,000 – 8,000 bph
Home & Personal Care
Detergent, shampoo and household bottles with moulds tuned for shape, colour and label surfaces.
- Bottle range
- 0.2L – 3L
- Typical output
- 1,000 – 10,000 bph
Pharmaceutical Bottles
Precision moulds for regulated bottle formats, with consistent wall thickness and clean cavity finishes.
- Bottle range
- 0.05L – 1L
- Typical output
- 500 – 6,000 bph
Auto Glass Washer Fluid
Large-format jugs and 5-gallon containers where handling and wall thickness matter more than raw speed.
- Bottle range
- 1L – 5 gal
- Typical output
- 500 – 4,000 bph
How a Line Comes Together
From preform and mould to remote support
Four stages that keep the machine, the mould and the air system defined against each other.
01
Preform & Mould
We start from your bottle design — neck finish, weight and appearance — and build the mould set the machine will run.
02
Blow Moulding Machine
A machine platform is selected by bottle size and target output, with heating zones and cavity count matched to the mould.
03
Air Compressor & Auxiliaries
High-pressure air, cooling, drying and preform handling are sized to the machine so the line reaches working conditions together.
04
Installation & Remote Support
Commissioning guidance, operator training and English remote after-sales follow the line into production.
Selection Guide
Two questions set the whole line
Bottle size decides the machine family; output target decides cavity count and the air system.
By Bottle Size
Choose the bottle range first — it sets the machine family and the mould design.
Up to 2L
Compact containers — water, CSD, dairy and pharmaceutical bottles.
2L – 3L
Mid-size bottles, including edible oil, larger home-care and detergent containers.
3L – 5 gal
Large containers and 5-gallon returnable bottles for water and washer fluid.
By Output Capacity
Then set the output target — it determines cavity count and the air system.
A few hundred bph
Low-speed large-bottle lines where gentle handling matters more than speed.
Thousands bph
Standard high-cavity production for water, CSD and home-care bottles.
Tens of thousands bph
High-speed multi-cavity lines running continuous shifts.
Next step
Tell us the bottles and the output
Share the bottle sizes you run and the output you need, and we will shape a line around them.